Aastra Telecom SISIP 57I CT - Manual (Page 279)

Operational Features
41-001160-00, Rev 01 Release 2.0 5-151
Operational IP Phone Features
Operational IP Phone Features Configuring Ring Tones and Tone Sets
Use the following procedures to configure ring tones and tone sets on the IP
phones.
Configuration Files
For specific parameters you can set in the configuration files for ring tones, see Appendix A, the section,
“Ring Tone and Tone Set Global Settings” on page A-77 or “Ring Tone Per-Line Settings” on page A-78.
IP Phone UI
Step Action
For global configuration only:
1 Press on the phone to enter the Options List.
2 Select Tones.
3 Select Set Ring Tone.
4 Select the type of ring tone (Tone 1 through Tone 5, or Silent).
For 53i:
Press Set.
For 55i/57i/57i CT:
Press Done.
5 Select Tone Set.
6 Select the country for which you want to apply the tone set.
Valid values are Australia, Europe, France, Germany, Italy, UK, and US. Default is US.
For 53i:
Press Set.
For 55i/57i/57i CT:
Press Done.
The ring tone and tone set you select is immediately applied to the IP phone.