Programmable key settings for 53i and 55i, Appendix a – Aastra Telecom SISIP 57I CT User Manual
Page 459
Hard Key Parameters
41-001160-00, Rev 01 Release 2.0
A-117
Configuration Parameters
Appendix A
Programmable Key Settings for 53i and 55i
•
The value of "N" for the following parameters is dependent on the number of
programmable keys available on the 53i models. See the table on
for
the applicable values
.
Parameter –
prgkeyN type
Type
(in Web UI)
Aastra Web UI
Operation->Programmable Keys
Configuration Files aastra.cfg,
Description
The type of programmable key to configure. Valid types are:
•
none - Indicates no setting for programmable key.
•
line - Indicates programmable key is configured for line use.
•
speeddial - Indicates programmable key is configured for speeddial
use
•
dnd - Indicates programmable key is configured for do not disturb
on the phone. This option is "do not disturb" in the Aastra Web UI).
•
blf - Indicates programmable key is configured for Busy Lamp Field
(BLF) use. User can dial out on a BLF configured key.
•
list - Indicates programmable key is configured for BLF list use.
User can dial out on a BLF List configured key.
•
xml - Indicates programmable key is configured to accept an XML
application for accessing customized XML services. You can also
specify an XML softkey URL for this option.
•
flash - Indicates programmable key is set to generate a flash event
when it is pressed on the 53i. The IP phone generates flash events
only when a call is connected and there is an active RTP stream (for
example, when the call is not on hold).
•
sprecode - Indicates programmable key is configured to
automatically activate specific services offered by the server. For
example, if the sprecode value of *82 is configured, then by
pressing the softkey, *82 automatically activates a service provided
by the server.
•
park - Indicates programmable key is configured to park incoming
calls when pressed.
•
pickup - Indicates programmable key is configured to pick up
parked calls when pressed.
•
lcr - Indicates programmable key is configured for “last call return”
when pressed.
•
directory - Indicates programmable key is configured to access the
Directory List.
•
callers list - Indicates programmable key is configured to access
the Callers List.
•
conference - Indicates programmable key is configured as a
conference key. Enter as “conf” in configuration files.
•
transfer - Indicates programmable key is configured as a Transfer
key for transferring calls. Enter as “xfer” in configuration files.
Format
Text