Configuring the ip phones – Aastra Telecom SISIP 57I CT User Manual
Page 101
Advanced Network Settings
41-001160-00, Rev 01 Release 2.0
4-35
Network Configuration of the IP Phones
Configuring the IP Phones
IP Phone UI
Step Action
1
Press
on the phone to enter the Options List.
2
Select Network.
3
Select Type of Service.
4
Select SIP, RTP, and/or RTCP and enter a value from 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table
on
For more information, see the section
on
5
Press Done to save the changes.
6
Press Done 2 more times to return to the Options List menu.
7
Select Phone Status.
8
Select Restart Phone and press Restart to reboot the phone for the ToS/DSCP settings to take
affect.
This manual is related to the following products: