Aastra Telecom SISIP 57I CT - Manual (Page 181)

Operational Features
41-001160-00, Rev 01 Release 2.0 5-53
Operational IP Phone Features
Operational IP Phone Features
Configuring BLF/BLF List for Directed Call Pickup
Use the following procedure to configure BLF/BLF List for Directed Call Pickup
in the configuration files.
4 Click to save your changes.
You must restart your IP phone for the changes to take affect.
5 Click on Operation->Reset.
6 In the "Restart Phone" field click to restart the IP phone and apply the changes.
Note: You must enable Directed Call Pickup bofore performing these
procedures. See “Enabling/Disabling Directed Call Pickup” on
page 5-52 .
Configuration Files
To set BLFor BLF\List in the configuration files for Directed Call Pickup, see Appendix A, the section,
“Softkey/Programmable Key/Feature Key Parameters” on page A-108.
To enable Directed Call Pickup on the IP phone using the configuration files, see Appendix A, the section,
“Directed Call Pickup (BLF or XML Call Interception) Settings” on page A-104.
Aastra Web UI