Hach-Lange SC 200 Profibus network card User Manual - Manual (Page 13)

Table 7 Status indicator messages (continued)
Bit Message Indication
8 Measurement 1 Low Limit Measurement is below the specified range.
9 Measurement 1 High Limit Measurement is above the specified range.
10 Measurement 2 Quality Bad Precision of measurement is out of the
specified limits.
11 Measurement 2 Low Limit Measurement is below the specified range.
12 Measurement 2 High Limit Measurement is above the specified range.
13 Measurement 3 Quality Bad Precision of measurement is out of the
specified limits.
14 Measurement 3 Low Limit Measurement is below the specified range.
15 Measurement 3 High Limit Measurement is above the specified range.
Event Log
Refer to Event Log for diagnostic device information.
Table 8 Event log
Event Description
ADDRESS Adjusted Profibus address
DATA ORDER Indicates the data order of 2 word variables in the cyclic and
acyclic Profibus telegram
SIMULATION Indicates if the simulated data is set into the cyclic Profibus
telegram.
Table 8 Event log (continued)
Event Description
SENSOR POWER Turn-on instant of the Profibus card
SET DATE/TIME Point in time set-up of the internal timer of the Profibus card
NEW CONFIG Point in time of a new configuration
AUTO CONFIGURE Point in time of a new menu setting
CODE VERSION Point in time of a new software download (Software version)
Replacement parts and accessories
Communication network cards and accessories
Description Item number
Profibus DP kit 9173900
Profibus M12 connector kit 9178500
Profibus M12 socket Profibus 9178200
Profibus M12 T plug 9178400
Product and Article numbers may vary for some selling regions. Contact
the appropriate distributor or refer to the company website for contact
information.
English 13