Hach-Lange SC 1000 - Manual (Page 79)

77
Section 6 Advanced Operations
The following section describes all software settings for the sc1000 controller. The
software settings from the Main Menu include:
• SENSOR DIAGNOSTIC
• SENSOR SETUP
• sc1000 SETUP
• TEST/MAINT
• LINK2SC
• PROGNOSYS
6.1 SENSOR DIAGNOSTIC menu
The SENSOR DIAGNOSTIC menu lists errors, warnings and reminder of all connected
probes/devices. If a probe is displayed in red, an error or a warning has been detected.
6.2 Sensor setup menu
The sensor setup menu lists all connected probes. Refer to the appropriate probe manual
for probe specific menu information.
SENSOR DIAGNOSTIC
Select Device
ERROR LIST
Displays a list of errors currently present in the probe.
If the entry is marked red an error is detected.
Refer to the appropriate probe manual for more information.
WARNING LIST
Displays a list of warnings currently present in the probe.
If the entry is marked red a warning is detected.
Refer to the appropriate probe manual for more information.
REMINDER LIST
Displays a list of reminders currently present in the probe.
If the entry is marked red a reminder is detected.
Refer to the appropriate probe manual for more information.
MESSAGE LIST
Displays a list of warnings currently present in the probe.
Refer to the appropriate probe manual for more information.