2 sim card requirements, 3 insert the sim card into the display module, Installation – Hach-Lange SC 1000 User Manual
Page 49

47
Installation
Safety precautions for SIM card installation
•
The SIM card can be taken out. Keep the SIM card out of the reach of children.
Harmful if swallowed.
•
Remove all power before replacing SIM card.
Safety precautions for antenna installation
•
Only use antennas, which are recommended or supplied by the manufacturer.
•
The antenna must be mounted at least 20 cm (8 in.) away from any person.
•
Do not let antenna rise up outside of protected buildings and secure antennas against
lightning!
•
Remove all power before replacing an antenna.
3.10.2 SIM card requirements
The SIM card must be enabled by a provider and registered in the sc1000 controller.
The SIM card requirements are:
•
GSM network supports “GSM Phase 2” (minimum)
•
Includes the services “SMS (short messaging service)” and “Data Services”.
•
Complies with the standards “ISO 7816-3 IC” and “GSM 11.11”.
Note: Contact the local Hach/HachLange support to discuss the SIM card and provider
requirements.
3.10.3 Insert the SIM card into the display module
Important Note: The touch screen is scratch sensitive. Never place the touch screen on a
hard and scratching surface.
To insert the SIM card into the display module:
1. Disconnect the display module from the probe module.
2. Place the display module on a soft and flat base.
3. Remove the SIM card cover from the back side of the display module (
4. Press the button to eject the card holder for the SIM card.
5. Put the SIM card into the SIM card holder, and put the SIM card holder into the SIM
card slot.
6. Attach the cover with the two cover bolts.
7. Connect the display module to the probe module.