Hach-Lange SC 1000 - Manual (Page 52)

50
Installation
3.11.2 Prepare the storage card
A plain/new storage card has to be prepared first with the ERASE ALL command of the
sc1000 software.
To prepare the storage card:
1. Select sc1000 SETUP, STORAGE CARD, ERASE ALL.
2. Confirm the message.
3. The sc1000 software removes all files from the storage card and creates the storage
card folder structure ( Table 14 ).
4. The storage card is ready for use.
5. To prevent data loss please only remove card using function REMOVE under the
menu sc1000 SETUP, STORAGE CARD, REMOVE.
Figure 37 Insert the storage card to the display module
1 Storage card slot 3 Storage card
2 Storage card cover at the display module
Table 14 Storage card, folder structure
Folder name Content
dev_setting Configurations and settings
sc1000 Log files, Backup files
update Files for software update