Hach-Lange SC 1000 - Manual (Page 112)

110
Advanced Operations
6.3.5 GSM module
The GSM Module menu contains all settings which are needed for remote communication
(dial-up) between the sc1000 controller and a computer.
For more detailed information refer to section 3.10, page 45 .
Note: This menu is displayed only if a GSM modem is installed in the sc1000 controller
TEST/MAINT
Default value: DISABLED
This menu works independently from the simulation.
DISABLED: Normal operation mode
ENABLED: Sets the TEST/MAINT bit (0x0040) of every status register of every configured slave
to indicate the “Service” mode.
VERSION Displays the current software version of the Modbus network adapter card.
LOCATION Displays the current location.
sc1000 SETUP
NETWORK MODULES
FIELDBUS
Figure 67 Modbus simulation mode
1 Time (x-axis) 4 Minimum
2 Period 5 Maximum
3 Period 6 Simulated value (y-axis)
Table 39 Color/line code for Figure 67
First floating point value