Hach-Lange SC 1000 - Manual (Page 72)

70
Standard Operations
5. Enter the password in the sc1000 log on screen.
6. The browser access screen is displayed ( Figure 49 and Table 21 ).
5.14 Log data
The sc1000 controller provides a data log and an event log for each device/probe. The
data log contains the measured data at selected intervals. The event log contains a large
number of events that occur on the instruments, such as configuration changes, alarms
and warnings, etc. The data log and the event log can be exported to the .csv, .txt and
.zip file format. The logs can be downloaded on a storage card or with browser access on
a hard disk drive of a computer.
Figure 49 Browser access screen
Table 21 Browser access screen—Navigation keys
Button Function
LOGOUT Logs the user out.
MENU Opens the Main menu screen to configure the sc1000 controller.
UPDATE Performs software updates of the display and the probe module.
LOGGER Reads, saves and removes log files.
DEFAULT SETTINGS
Restores the default manufacturer settings of the display module.
Sets the update speed for the bus systems.
DIAGNOSTIC FILE Creates a diagnostic file in the .wri file format.