Hach-Lange SC 1000 - Manual (Page 114)

112
Advanced Operations
PLMN CODE
The GSM module searchs a wireless network automatically. Abroad or in border areas it
may be necessary to dial in a mobile network if there are several mobile networks
available. This requires to configure the PLMN Code. The first three digits of the PLMN
code display the country (Mobile Country Code (MCC)) and the last two digits display the
mobile network (Mobile Network Code (MNC)). Select a PLMN code „0“ to activate the
automatic network selection.
You find out the data for the wireless network by your wireless service provider or the
Internet.
START TIME
Sets the start time for the REPEAT cycle.
(Example: REPEAT=6 hours, START TIME=2:00: Not confirmed messages are sent at 2:00,
8:00, 14:00, 20:00).
INHIBIT SMS
REPETITIONS
Default value: “OFF”
OFF: SMS messages are sent repeatedly.
ON: SMS messages are not sent repeatedly.
CONFIGURE The display module observes the states of the configured devices included in this list.
ADD
Adds a device to the CONFIGURE list
Displays all installed devices including the sc1000. Devices that are already in the
CONFIGURE list are grayed-out.
ERASE Removes a device from the CONFIGURE list.
configured device
1-4>
Sets up single messages for a device.
ERROR Contains all errors of the selected device.
1=A SMS is sent if the error occurs.
0=No SMS is sent if the error occurs.
WARNING: This menu includes all possible warnings of the chosen device. If you want to get
a SMS if the warning occurs, activate (1) the corresponding error. If you want to ignore the
warning, deactivate (0) it.
(Default: All activated)
CHOOSE ALL: Activate (1) or deactivate (0) all menu items at once.
EVENTS: This menu includes all possible events of the chosen device. If you want to get a
SMS if the event occurs, activate (1) the corresponding event. If you want to ignore the event,
deactivate (0) it.
(Default: All activated)
SIM CARD VOICE
Enter the telephone number for voice calls for the installed SIM card.
This information is not necessary but makes it easier to identify the installed SIM card.
SIM CARD DATA Enter the telephone number for data calls for the installed SIM card.
SMS PROVIDER Displays the SMS service centre number of the SIM card.
PIN Enter the PIN number for the SIM card.
SOFTWARE VERSION Displays the adapter software version
SERIAL NUMBER GSM Displays the serial number of the installed GSM cellular module.
SIM-ID Displays the SIM card serial number.
PLMN CODE For detailed description see below.
sc1000 SETUP
GSM MODULE