Analog Way Eikos LE - Manual (Page 78)

Working with Audio
The Eikos LE allows to work with up to 10 stereo inputs, 1 auxiliary input, and 2 embedded SDI
audio inputs (via the SDI BNC connectors), all accessible via the Audio menu of the Eikos LE, and
which can be affected to one or both of the 2 independent symetrical/asymetrical outputs of the
device.
To configure audio settings of the Eikos LE,
plug all audio inputs into the device, and click
on the Audio tab of the RCS home page.
1. Set the Main audio output level and delay
(accessible only if Delay Mode is set to
Manual Adjust), or click on the Mute button
to mute Main audio output.
2. Repeat step 2 for the Prelist audio output.
3. Individual source settings (level and
balance) for each audio input can be
configured in the right hand section of the Audio tab.
Audio configuration
76