Analog Way Eikos LE - Manual (Page 33)

Freeze button
Take button
Effect selection button
The Freeze button of the Eikos LE allows users to freeze the
Main output current display or the active layer, depending on
the freeze mode: Freeze All or to freeze the current selected
layer [Input Freeze].
The Eikos LE TAKE button allows to switch from Preview to
Main outputs. By pressing the TAKE button, what you have
setup on your preview screen will be transitioned to the Main
output display.
The Eikos LE EFFECT SELECTION button selects the
assigned Effect to the active layer.
Preset selection button
The Eikos LE PRESET SELECTION button allows you to
instantly recall a saved preset.
Input selection section
The Input Selection section allows to select which input
(#1 to #12) to display in a selected layer. Select one of 12
simultaneous inputs, (6 analog inputs, 2 DVI-D inputs, 4 SDI
inputs) by simply pressing one of the Input buttons.
! The BLACK button allows users to remove layer content on screen.
31