Analog Way Eikos LE User Manual

Page 49

Mixer functions

In Multi Layer Mixer mode, the

Eikos LE offers a variety of mixer type transitions, including wipes,

fades, and cuts. The transitions, transition times and fade/wipe effects can all be setup through the

Eikos LE Layer menu.

2. In the Layer Selection section, press the PIP1 button. The button will start blinking. On your Preview

screen, PIP1 will appear as a color rectangle. The parameters of the layer will automatically

appear on your

Eikos LE VFD menu screen.

3. In the Layer menu, make the position, size, border and transparency settings you like, then

select Opening Effect in the layer options, press the ENTER button and select Type. Select Slide

Left - Right for example, and press the ENTER button to confirm. Navigate to Duration in the

Opening Effect sub-menu, and set the duration of your effect by rotating the SCROLL knob and

pressing ENTER.

Repeat the procedure in the Closing Effect sub-menu to determine the way your layer will close. Try

Slide From Left - Right for the closing type with a duration of 1.5 seconds for example.

The

Eikos LE offers a wide variety of transitions between the scenes you create for your shows and

events. It allows for live recall of 4 user presets, each of which you can edit at any given time.

1. Whether catering for complex event setups, or putting together intricate shows, your

EikosLE

will also deliver some of what you could expect from a dedicated mixer, along with its switcher

and scaler capabilities.

Layer transitions & effects

Capturing Logos

To capture a Logo, display the exact content you want to save on the main screen, you can use the

freeze button if you want. Then follow these steps:

Logos/Frames menu → Record Logo menu → Set up your logo →Store menu → logo#

To set up your logo, you have several features available:
-

Position/size Adjustment

Keying type

Luma key/ Chroma key

Cut out color

Select the logo number you want to save and wait until the unit finish saving. Your logo is now saved

and you can use it through the background logo button.

You can save up to 8 logos with the Eikos LE.

The capture of logos can be done only with the following conditions:
-

The unit can be in Mixer Mode or Matrix Mode

The capture can be done on the Main output or the Preview output

The disappearance of logos on the Preview and Main output is normal.