Analog Way Eikos LE - Manual (Page 75)

Working with PIPs
The Eikos LE allows users to manipulate 2 PIPs (Picture In Picture) which you can move, size, crop
or zoom, apply transparency or transitions to.
PIP configuration
1. Click on the Image tab of the RCS interface.
The empty Image screen will appear on screen.
2. By clicking on the drop-down menu in the
Preview section, situated next to the layer
you wish to use as a PIP, you will access the
image parameters of the PIP source you select
(#1 to #12).
3. Set the desired PIP attributes (size, position,
zoom, border, transparency...).
4. Click on the Image tab to return to the main
screen.
Working with Frames
It is possible to store up to 8 frames in the Eikos LE
non volatile memory. Frames are mainly used as
backgrounds in a typical show or event setup,
and can be recorded from any of the 8 Eikos LE
sources and called back at the click of a single
button.
* NOTE * : To memorize a frame, select an input,
and take it to the Main screen. Once the frame is
displayed on your Main output, it is then possible to
store it to the Eikos LE non volatile memory.
* NOTE * : Frames may be used only one at a time. A frame may not be used as a Live Background.
Memorizing Frames in the Eikos LE
1. In the Input Selection section, click on the source
button (#1 to #12) of the source you wish to
record as a frame.
2. Click on the Logos/Frames tab of the RCS
interface. Then click on the Record Frame
button.
3. Click on the field next to the first free Frame to
select it.
4. Click on the Execute button.
73