Analog Way Eikos LE - Manual (Page 48)

Memorizing Frames
The Eikos LE can memorize up to 8 frames from any resolution (see Capturing still Frames).
1. In the Input Selection section, press the source button (#1 to #12) of the source you wish to
record as a frame. The source button will start blinking. Press the TAKE button to display that
source on the main display.
2. Select Logos/Frames in the menu by rotating the scroll knob, then press the ENTER button.
3. Select Record Frames in the Logo/Frames menu by rotating the scroll knob, then press the
ENTER button. A white rectangle will appear on your main display or your Preview, indicating the
frame which will be captured. Select an empty frame memory (empty frames are indicated in the
sub-menu) to store the frame into. Press the corresponding ENTER button.
4. The Eikos LE will display a progress status bar on the VFD screen. Your frame is stored when
the menu reappears on the VFD screen.
5. Press the BACKGROUND FRAME button, select the frame number (1 to 8) you just recorded,
and press the TAKE button. Your background frame will appear on your preview output.
Frame input setup menu
Frames as Layer
In the frame input setup menu, you have the possibility to save a frame, and the possibility to erase
a stored frame:
Logos/Frames menu → save frame → Frame #
Logos/Frames menu → Erase → Frame #
The background frame is considered as a layer and has some settings available:
Transparency, Opening/Closing effect, Smooth move and Status.
Those settings have to be used as Layer settings.
Press background frame button to have access to the Layer menu settings
You can change frame or delete frame on the preview screen using the same way the layers do:
Clear: Press background frame button → Press Black
Change: Press background frame button → Press another Frame #
Press Take to view the result on the main screen.
46