ALLIED Vision Technologies Oscar F-810 - Manual (Page 103)

Controlling image capture
OSCAR Technical Manual V2.4.0
103
The functionality is controlled via bit [6] and bitgroup [12-15] of the IIDC
register:
Register Name Field Bit Description
0xF0F00830 TRIGGER_MODE Presence_Inq [0] Presence of this feature:
0: N/A
1: Available
Abs_Control [1] Absolute value control
O: Control with value in the Value field 1:
Control with value in the Absolute value
CSR
If this bit = 1 the value in the value field
has to be ignored.
--- [2..5] Reserved
ON_OFF [6] Write: ON or OFF this feature
Read: read a status
0: OFF
1: ON
If this bit = 0, other fields will be read only.
Trigger_Polarity [7] Select trigger polarity
(Except for software trigger)
If Polarity_Inq is 1:
Write to change polarity of the trigger
input.
Read to get polarity of the trigger input.
If Polarity_Inq is 0:
Read only.
0: Low active input
1: High active input
Trigger_Source [8..10] Select trigger source
Set trigger source ID from trigger source
ID_Inq.
Trigger_Value [11] Trigger input raw signal value
read only
0: Low
1: High
Trigger_Mode [12..15] Trigger_Mode
(Trigger_Mode_0..15)
--- [16..19] Reserved
Parameter [20..31] Parameter for trigger function, if required
(optional)
Table 31: Trigger_Mode_15 (Bulk trigger)