Avtech sensors, It & facilities environment monitoring made easy, 25´ light tower extension cable – AVTECH Room Alert 12ER Monitor (RA12E-TH1-RAS) User Manual
Page 54: Light tower & relay adapter, Power over ethernet active splitter, Voice modem w/usb connect, Gsm modem w/usb connect, Light tower, Light tower w/audio, Axis m1031-w camera bundle
$
180
25´ Light Tower Extension Cable
ST-025G2-CAB
INCLUDES: 25´ Light Tower Extension Cable & installation note.
•
Designed to extend the length of AVTECH’s
Light Tower w/Audio.
•
Can be extended by adding additional 25´ extensions.
Maximum extension length is 100´.
•
Requires connection in-line between AVTECH’s
Light Tower w/Audio and Room Alert 32W, 32E
or 4E environment monitors.
•
Compatible with the Light Tower w/Audio ONLY.
$
75
Light Tower & Relay Adapter
LT-32-ADP
•
Required to connect the Light Tower, Light Tower
w/Audio or Relay Switch Sensor to AVTECH’s Room
Alert 32W, 32E or 3E. Allows use of the Light Tower,
Light Tower w/Audio or Relay Switch Sensor up to
100’ away from the Room Alert ID box.
•
Includes (1) relay switch that can be used to turn on/off
low voltage devices automatically in response to an
alarm condition and separate 5V power supply.
•
The relay supplies 0.3A at 125VAC or 1A at 24VAC.
INCLUDES: Light Tower & Relay Adapter, 25´RJ 11 cable, 5V power adapter & installation note.
•
Allows easy integration of Power over Ethernet (PoE)
technology with AVTECH’s monitoring hardware.
•
Use with Room Alert and/or TemPageR and monitor
anywhere PoE enabled Ethernet is available.
•
Active Splitter supports 10/100BaseT.
•
Compatible with Room Alert 26W, 26WO, 24E,
11E, 7E, 4E, TemPageR 4E & 3E.
Power Over Ethernet Active Splitter
POE-ADP-01
INCLUDES: PoE Active Splitter (5V, RoHS), 2 adapter cables & installation note.
$
75
$
70
•
56K Phone/Internet/Fax modem that connects
computers to the internet using a dialup connection.
•
Use with AVTECH’s Dial Out Plugin and Device
ManageR software to trigger modem to dial a phone
and send or speak text when an alert is generated
from any Room Alert, TemPageR or Axis camera.
•
Compatible with AVTECH’s Device ManageR
software, Dial Out Plugin & PC with USB.
Voice Modem w/USB Connect
MOD-VCE-2
INCLUDES: 56K USB Phone/Internet/Fax modem, installation CD & installation note.
$
45
GSM Modem w/USB Connect
MOD-GSM-1
•
Immediate connectivity to any GSM/GPRS network.
•
Controlled via AT commands.
•
Use with AVTECH’s Dial Out Plugin and Device
ManageR software to trigger modem to dial out to
any GSM network and send your alert generated by
Room Alert, TemPageR or Axis camera.
•
Compatible with AVTECH’s Device ManageR
software, Dial Out Plugin & PC with USB.
INCLUDES: AirLink GL 6110 GSM Modem w/USB Connect,
8˝ USB connection cable, FME Antenna & installation note.
AVTECH Sensors
IT & Facilities Environment Monitoring Made Easy!
Order through your favorite reseller, direct from AVTECH or online at
EnvironmentMonitor.com
$
175
* Additional Sensors, Cameras & Accessories Available Online.
** Use with Room Alert 32E, 32W & 3E requires LT-32-ADP.
Light Tower
**
ST-2RG-LT
•
Light Tower lights turn on when alarms are
detected (i.e. pings fail, high temps, etc.).
•
Lights turn on/off via SNMP set, URL & interactively
via AVTECH’s Device ManageR software.
•
Includes 3´ Light Cable; no extension cable available.
•
Compatible with Room Alert 32W, 32E, 4E & 3E.
Room Alert 32W, 32E & 3E require LT-32-ADP.
INCLUDES: Light Tower, Red & Green Lights, 3’ cable, mount bracket & installation note.
$
180
•
Light Tower lights turn on when alarms are
detected (i.e. pings fail, high temps, etc.).
•
Lights turn on/off via SNMP set, URL & interactively
via AVTECH’s Device ManageR software.
•
Adjustable audio alarm with intensity range of
0 to 95 dB (at 1m).
•
Includes 15´ Light Cable; 25´ Extension Cable available.
•
Compatible with Room Alert 32W, 32E, 4E & 3E.
Room Alert 32W, 32E & 3E require LT-32-ADP.
Light Tower w/Audio
**
ST-RYG-LT
INCLUDES: Light Tower w/ Audio, Red, Yellow & Green Lights, 15’ cable, mount bracket & installation note.
$
250
MOST POPULAR
•
Superior image quality using a progressive scan
CMOS image sensor and advanced video processing.
•
Supports 30 frames/second up to 640 x 480.
•
Built-in microphone, speaker, motion and audio detection.
•
Advanced alerting when sensors trip and snap shot
photos sent with links to live video.
•
Connects via Wireless IEEE802.11g and Ethernet.
Axis M1031-W Camera Bundle
AX-M1031W-CAM
INCLUDES: Axis M1031-W Network Camera, mounting stand, built-in microphone, speaker,
motion and audio sensors, tamper alarm, Device ManageR software license & installation note.
$
279
BEST SELLER
BEST SELLER
BEST V
ALUE
* We offer all Axis cameras... call us for a quote.