AVTECH Room Alert 12ER Monitor (RA12E-TH1-RAS) - Manual (Page 26)

Room Alert 12E
22 AVTECH Software, Inc.
Navigate to Settings Æ Sensors to open the “Sensor Settings” screen.
General Alarm Configuration
In “Degrees Within Threshold Before Alarm Is Cleared,” you may leave the default, 1, or enter a
value between 0.1 and 25.5.
You may use this feature to adjust how close your digital temperature sensor readings must get to
a high or low threshold before their alarms clear. For example, with the default setting here of 1º
Notice the “Alarm Profile” drop-down menu next to each sensor.
If you have a Light Tower (any model) or Relay Switch Sensor
connected to your Room Alert via a Light Tower & Relay
Adapter, you may configure Alarm Profiles. Please refer to the
Alarm Options section in this manual for further information.
NOTE