AVTECH Room Alert 12ER Monitor (RA12E-TH1-RAS) - Manual (Page 42)

Room Alert 12E
38 AVTECH Software, Inc.
• Your Room Alert 12E can immediately send an update to Device ManageR when it
detects an alarm, regardless of any intervals you have configured either in this section
or in the Device ManageR discovery interval.
To enable Push to Device ManageR from your Room Alert 12E:
1. Select Enable Device ManageR Push .
2. In “Server IP Address,” enter the IP address of Device ManageR’s host system.
3. In “Server Port,” enter the port Device ManageR uses. The default is 8080.
4. In “Push Interval,” choose the number of minutes you would like between pushes from
the drop-down list.
5. Click Accept Changes at the bottom of your screen to temporarily save your settings.
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
6. Click Save Settings in the navigation bar to the left of your screen. Your Room Alert
12E will automatically reboot and commit your changes.
Time & Date Configuration
You may set the time and date defaults for your Room Alert 12E here.