AVTECH Room Alert 12ER Monitor (RA12E-TH1-RAS) - Manual (Page 18)

Room Alert 12E
14 AVTECH Software, Inc.
Network
Navigate to Settings Æ Network to open the “Network Settings” screen.
Device Name
To rename your Room Alert 12E:
1. Select the automatically-assigned name in “Device Name” and enter a new one of up to
15 alphanumeric characters.
2. Click Accept Changes at the bottom of your screen to temporarily save your settings.
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
3. Click Save Settings in the navigation bar to the left of your screen. Your Room Alert
12E will automatically reboot and commit your changes.
IP Address Configuration—DHCP
To obtain an IP address automatically using DHCP:
1. Select Obtain IP Address Automatically .
2. Typically, leave the “BOOTP,” “DHCP,” and “AutoIP” at their default, Enabled .
3. Click Accept Changes at the bottom of your screen to temporarily save your settings.
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
4. Click Save Settings in the navigation bar to the left of your screen. Your Room Alert
12E will automatically reboot and commit your changes.