AVTECH Room Alert 12ER Monitor (RA12E-TH1-RAS) - Manual (Page 22)

Room Alert 12E
18 AVTECH Software, Inc.
Email Recipients (Separated By Comma)
11. In “Email Addresses,” enter the email and email-to-SMS addresses that you’d like to
send alerts to. Separate each address with a comma.
• Email address: [email protected]
• Email-to-SMS address: [email protected]
• Addresses separated by commas: [email protected] , [email protected] ,
etc.
12. Click Send Test Email . This button will automatically save any changes made to the
“SMTP Email” tab before sending a test email message.
13. Click Accept Changes at the bottom of your screen to temporarily save your settings.
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
14. Click Save Settings in the navigation bar to the left of your screen. Your Room Alert
12E will automatically reboot and commit your changes.
TIP
If your test email is not received successfully, check your mail
server’s SMTP relay settings, which must allow anonymous
SMTP relay messages. If you entered a domain name for the
Mail Server Address, you may need to rename it to the IP
address or assign a static IP setting and have a DNS server IP
address set.
TIP
Your password cannot be more than 11 alphanumeric characters.