AVTECH Room Alert 12ER Monitor (RA12E-TH1-RAS) - Manual (Page 21)

Room Alert 12E
AVTECH Software, Inc. 17
1. Check Email Enabled .
2. Leave the Email Footer Enabled checked to include AVTECH contact information
with email messages.
3. Check Use SMS to send a shorter email with a reduced character count.
4. In “Mail Server Port,” enter your mail server’s SMTP port. The default is 25, a
commonly-used port.
5. In “Timeout,” you may leave the default, 5 seconds, or enter another interval.
6. In the “Mail Server” field, enter the domain name or IP address of your mail server.
7. In the “Return Address (From)” field, enter an email address that resides on your mail
server. This is the address alert messages will come from.
8. In “Display URL,” you may leave the default, which is the IP address and port of your
Room Alert 12E, or overwrite it with another IP address.
Authentification (Optional)
9. If your mail server requires SMTP authentication, check Enable Authentification .
10. In “Username” and “Password,” enter a valid username and password for your mail
server that will facilitate authentification.