AVTECH Room Alert 12ER Monitor (RA12E-TH1-RAS) - Manual (Page 27)

Room Alert 12E
AVTECH Software, Inc. 23
and a high threshold of 80º, your temperature sensor will alarm when the temperature rises above
80º and clear when it falls below 79º; likewise, with a low threshold of 60º, the sensor will alarm
when the temperature falls below 60º and clear when it rises above 61º.
Internal Sensor Alarm Configuration (Internal Temperature Sensor)
You may configure alert thresholds for the Internal Digital Temperature Sensor in the “Internal
Sensor Alarm Configuration” field. The temperature range is -40° to 185° F (-40° to 85° C).
1. In “Sensor Label,” you may leave the default label, “Internal Sensor,” or rename it to
something more descriptive, such as “Internal Temp.”
2. The “Alarm On” field is set at the default of “Temperature (F).”
3. Enter values in the “High” and “Low” field to set high and low temperature thresholds.
Your Room Alert 12E will generate alerts in response to these temperatures.
4. Enter a value in the “Adjust” field to calibrate the Internal Temperature Sensor if its
reading differs from a known temperature value at that location.
5. In “Use Alarm Profile,” which controls devices connected through the Light Tower &
Relay Adapter Port, you may leave the default, “No Alarm,” or choose an Alarm Profile
from the drop-down menu.
Refer to the Advanced section in this manual for instructions on
setting the default temperature scale.
NOTE