AVTECH Room Alert 12ER Monitor (RA12E-TH1-RAS) - Manual (Page 11)

Room Alert 12E
AVTECH Software, Inc. 7
A
B
How To Install Your Room Alert 12E
Step 1: Connect Your Room Alert 12E Hardware
If Your Network Is Power Over Ethernet (PoE) Enabled
• Connect one end of a standard Ethernet cable to the
Room Alert 12E’s Ethernet port.
• Connect the other end to a PoE-enabled network
jack.
That’s it! Your Room Alert 12E is now powered and discoverable on your network.
If Your Network Is Not Power Over Ethernet (PoE) Enabled
A. Connect To Your Network First
• Connect one end of a standard Ethernet cable to the
Room Alert 12E’s Ethernet port.
• Connect the other end to a network jack.
B. Then Connect To A Power Source
• Plug one end of AVTECH’s International Power
Adapter into the Room Alert 12E’s power port.
• Plug the other end into a surge-protected power source.
Your Room Alert 12E is now powered and discoverable on your network!
Use only AVTECH’s International Power Adapter. Others could
damage the Room Alert 12E and void your warranty. If you don’t
have one, please visit our online store at
AVTECH.com .
NOTE