Alpha Technologies AlphaNet IDH4 for XM2 and XM2-300HP Series - Technical Manual - Manual (Page 77)

77 746-257-B2-001, Rev. B (01/2014)
Fig. 11-3, Single IP IDH4 Series Web Page
(partial page only; data values shown for illustration purposes only)
11.0 Dual IP Mode
11.2 Web Comparison, Single IP Mode/Dual IP Mode
To easily determine the configuration of the Communications Module when viewing it on its web
page, check the Configuration line as well as the entries for the CM and CPE addresses. A single IP
Communications Module will display a CM MAC address only, while a Dual IP Communications Module
will also indicate a CPE address.
Fig. 11-4, Dual IP IDH4 Series Web Page
(partial page only; data values shown for illustration purposes only)
Displays CM MAC address only
Displays CM and CPE MAC addresses