0 web interface – Alpha Technologies AlphaNet IDH4 for XM2 and XM2-300HP Series - Technical Manual User Manual

Page 28

746-257-B2-001, Rev. B (01/2014)

4.7

Viewing HMS Alarm Status via the Web Page

HMS alarm levels and currently reported states may be viewed by clicking on the

HMS Alarms link on the

Advanced Configuration menu. An example is shown below. Parameter values cannot be edited on this

Web page. An SNMP MIB browser or status monitoring software may be used for such edits.

Fig. 4-14, HMS Alarm Configuration

(data values shown for illustration purposes only)

4.0 Web Interface

Refer to

Table 6-3, Recommended Settings for IDH4 Series Analog Alarms for information regarding the scaling applied to the

indicated values.