ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 81)

80
24. Explanation of terms
9 Jamming: Interference of the wireless frequency.
9 Supervision: The availability of the detectors is monitored (i.e. is there a
wireless connection: yes/no).
9 Tamper: For Tamper , the tamper contact is described which protects
the housing and lid of the alarm centre from unauthorised
removal.
9 SIP: The Session Initiation Protocol (SIP) is a network protocol for
setting up, controlling and dismantling a communication
session between two or more subscribers. SIP is a protocol
commonly used in IP telephony.
9 Push notifications … are messages you receive, even if the program on the
Smartphone is not running. The user receives programs /
apps which appear as messages like short text messages on
the display. To receive a push notification, you need an
internet connection (WLAN, UMTS,...).
9 LAN: Local Area Network
ƒ Direct connection of the Secvest IP alarm centre to a PC
Æ Cross-over cable (certain lines are swapped).
ƒ Connection of the Secvest IP alarm centre through a
switch Æ Patch cable required (all wires looped 1:1).
9 APP: Application
Æ Usually a small program on modern mobile phones
(e.g. iPhone).
9 NO: Normally Open (the detector contact is open when idle and
triggers as soon as the circuit is closed).
9 NC: Normally Closed (the detector contact is closed when idle and
open when activated).