ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 62)

14 Configuration of the web server
61
Push notifications usually arrive within the first 10 seconds after an
event is triggered on the control panel, but immediate delivery by Apple
is not guaranteed. If the target device is offline at the point in time of
the delivery, the push notification on the APNs server is cached for
later delivery.
Setting up the push pairing process between the app and control panel
Adding a new control panel:
1. Load Secvest IP 2.0 or higher from the iTunes App Store onto your end
device.
2. When the app first starts, confirm the activation of receipt of “push
notifications” from Secvest IP.
3. Use the setup wizard to add your Secvest IP control panel.
4. Press the “Push Pairing” button during the last setup step
(on the finish page) and wait for a confirmation from the control panel
(notification window).
5. Your control panel, app, and end device are now configured for push
notification.