ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 63)

14 Configuration of the web server
62
The control panel has already been added to the app:
(update from 1.5.2 to 2.0 or higher)
1. Load Secvest IP 2.0 or higher from the iTunes App Store onto your end
device.
2. When the app first starts, confirm the activation of receipt of “push
notifications” from Secvest IP.
3. Navigate to the “Settings” menu item and select your control panel.
4. Press the “Push Pairing” button in the control panel settings of the app and
wait for a confirmation from the control panel (notification window).
5. Your control panel, app, and end device are now configured for push
notification.
Important information about the receipt of push notifications:
9 Flight mode must be deactivated.
9 The Secvest IP app must be closed.
9 Internet access (3G / WiFi) must be active on the end device.
9 The control panel must have Internet access.
9 The language setting of the push notification is according to the
system language on the end device at the point in time at which the
pairing occurred.