ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 61)

14 Configuration of the web server
60
If no end devices have been set up (iPhone, iPod, or iPad), this list will be empty.
The registration (pairing) of an end device can be carried out on the control
panel using version 2.0 or higher of the Secvest IP app and control panel
firmware version 2.0.5 or higher.
To do this, the Secvest IP app reads the internal device name (such as ABUS
iPhone) and transmits it directly to the control panel. If the device name has
changed, you can update the name displayed on the control panel by repeating
the “pairing” process.
Up to six devices can be registered on the control panel for sending of push
notifications. In case of alarm (intrusion, fire, panic, technical), the control panel
sends a push notification to all registered devices. This notification is coupled
with an audible warning signal that is issued in parallel.
The Apple Push Notification Service (APNs) is provided directly by
Apple Inc. The service is used to issue an alarm on the basis of a
network connection between the Apple push server and the end device
with activated push service without it being necessary for the actual
application (Secvest IP) to be started. The push service is not a
guaranteed medium made available by the ABUS Security Center.
Push notifications can arrive late, be discarded, or not be delivered by
Apple.