ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 29)

14 Configuration of the web server
28
4. Sensor:
Internal setting: the network camera sends a warning via the internal PIR
sensor and has a warning function only.
External Setting: the network camera is in the recording mode and reacts in
the alarm centre in the event of an alarm.
5. Port: enter the network port of the connected component.
When using the IP alarm module, the HTTP port number is always
8081 and cannot be changed.
6. Password: password for accessing the connected component. (standard
setting for the PIR IP camera = password not assigned/standard setting for
IP alarm module = 12345).
To confirm your settings, please press “Apply”.
14.4 Outputs
Name the outputs according to their wireless programming and link them to events.