ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 50)

14 Configuration of the web server
49
Example – recipient A responds to the second round and deactivates the
alarm:
Recipient A (1) Æ Recipient B (1)Æ Recipient C (1)
Recipient A (2)
All the recipients are called until the alarm centre has been deactivated.
Deactivating the alarm centre terminates the calling process.
14.7 Activating / deactivating the alarm centre / Internal activation
These buttons let you activate/deactivate the control centre (guard mode “on” or
“off”).
The system can also be activated internally. This type of
activation is normally used to monitor the exterior of the object
when it is still occupied. In this case, specific detectors within
the object, such as motion sensors are removed from surveillance.
An internal activation is not possible via remote control!