ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 22)

14 Configuration of the web server
21
The 9 snapshots can be downloaded by clicking on “Download”, and saved.
The snapshots can also be downloaded as TAR archive. Ensure that
a TAR compatible data compression program is used to unpack the
archive (such as WinRAR or 7 Zip).
Bypass a channel via the Overview Menu
In the Input area you also can easily bypass a channel. This function allows
you to take out one channel with its learned detectors, so that these will not
trigger any alarm. If you set bypass for a channel, this will be valid for the next
activation of the alarm panel.
To bypass a channel, click on the Status-LED of the channel you want to
bypass. (like shown in the screen shot). Tick the bypass button to “On” and
click “Apply”. The Status-LED will turn gray. If you would like to undo the
bypass, so click again on the Status LED and choose “Off” and also click
“Apply” to confirm. If you set a channel on Bypass “On”, this channel will not
detect any alarm for the next activation of the alarm panel. After the next
deactivation, the channel will be automatically set on bypass “Off”.