ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 58)

14 Configuration of the web server
57
5. Maintenance (training mode / firmware update)
The “Maintenance” menu item is used to change the system name, make a
firmware update, restart the system, switch to the training mode or reset the
system to the factory settings.
Firmware updates
To update the firmware, click on “Browse” to select the update file on your
computer. To start the update, click “Install”. The update process can take
several minutes – never terminate the connection between your computer and
the Secvest IP during this time. The system is restarted after the update is
completed.
Factory Settings
The IP module default parameters are restored, which means that all the
settings made with the web server will be lost.
Restart
This starts the IP module again and the network connection. Settings and
trained detectors will not be lost and do not have to be retrained.