ABUS FUAA10021 Secvest IP Basic Set Operating instructions - Manual (Page 46)

14 Configuration of the web server
45
5. SIP Account
Under “SIP account”, the SIP telephony is activated/deactivated as well as
configured. For the activating option, the centre can make a Voice-over-IP call
in the event of an alarm. The following requirements must be in place to do this:
• Registered SIP account for your centre at an SIP provider
• SIP “On” function
• Valid “Number” (for SIP-to-SIP SIP-to-PSTN) in the recipient area
• Configuration of SIP call for alarm (SIP rules)
To activate SIP telephony, move the regulator to “On”. You obtain the domain,
user ID and password when your provider creates your SIP account.
Providers tested by ABUS:
9 http://www.localphone.com
9 http://www.sipgate.de
Depending on provider, nomenclature of user ID and password can be
different:
Sigate.de Æ Anmelden Æ Einstellungen:
Benutzer ID =
SIP-ID
Passwort = SIP-Passwort
Localphone.com Æ Login Æ Account:
Benutzer ID =
SIP ID
Passwort = SIP Password
Æ see also point “3. Recipient Æ Setting up an SIP account”