ABUS AZ6302 Terxon GSM dialer - Manual (Page 96)

96
Play Restore Message 1-8 *5 (then 1-8 for the voice message
number)
Enter Contact Number 1-10 *7 (then 1-0 for the contact number)
Test Triggers *8 (then 1-8 for the number)
Play Memo 0
Record Memo *0 (then 0 or any other key to finish)
Cancel Remote Access #
IMPORTANT:
The GSM dialer ends the call automatically if no selection is made for 60
seconds following dial-up. If a command is selected, then the device remains
in programming mode for 5 minutes.
11.3.2.1 Switching outputs
Under this menu point, you can switch the outputs 1-4 on and off over the
telephone.
4. Establish a connection to the GSM dialler.
5. Press one of the following keys on the telephone for the
corresponding output:
Output Telephone
key
Tone signal
1 *11 On: 1 high-pitch tone
Off: 1 low-pitch tone
2 *12 On: 2 high-pitch tones
Off: 2 low-pitch tones
3 *13 On: 3 high-pitch tones
Off: 3 low-pitch tones
4 *14 On: 4 high-pitch tones