beautypg.com

ABUS AZ6302 Terxon GSM dialer User Manual

Page 78

background image

78

8.3.4 Access

Codes

The GSM dialer dialler is protected from unauthorised access by two codes:

User code

This four-digit code is necessary for programming the device and
cancelling dialling procedures. The default is “1234”.

Remote code

This four-digit code is necessary for remote programming of the
device. The default is “5678”.

8.3.4.1 Changing the user code

5. Enter your user code. Scroll through the menu options using the

keys, or alternatively press

to display the “Access Codes” menu

point.

↑↓ ENT to select

Access Codes


Confirm by pressing

. The following message is displayed: “User

Code”.

6. Press

to select. The display shows the following:

New User Code?

****


7. Enter your new four-digit user code and press

to confirm.

8. Press

to exit the menu.

8.3.4.2 Changing the remote code

5. Enter your user code. Scroll through the menu options using the

keys, or alternatively press

to display the “Access Codes” menu

point.

↑↓ ENT to select

Access Codes