ABUS AZ6302 Terxon GSM dialer - Manual (Page 83)

83
contacts 1, 3 and 5. However, alarm message B should be sent to contacts 2,
6, 7 and 8.
The auto report that is sent every 24 hours can also be transferred to one or
more contacts.
You can select from three different functions, all of which are programmed in
the same way:
• Alarm: Defines which contacts are called when an alarm input is
triggered.
• Restore: Defines which contacts are called when an alarm input
returns to its normal state.
• Auto report: Defines which contacts are dialled automatically every
24 hours for the auto report.
8.3.7.1 Proceed as follows to set the call sequence:
6. Enter your user code. Scroll through the menu options using the
keys, or alternatively press to display the “Call Routing” menu
point.
↑↓ ENT to select
Call Routing
Confirm by pressing
. The following message is displayed:
“Alarm”.
Use the scroll keys to select “Restore” or “Auto Report”.
7. Press to select.
Route Alarm A
to 1234567890
8. Each number represents a contact (1-10). Use the number keys to
select or deselect the relevant number. The number is displayed
when the contact is selected. A star is displayed when the contact is
not selected. As seen in the display, the alarm message A is sent to
all 10 numbers except those on contacts 2, 5 and 8.
Route Alarm A
to 1*34*67*90