ABUS AZ6302 Terxon GSM dialer - Manual (Page 84)

84
9. Use the scroll keys
to change the call sequence of the other
alarm messages.
10. Confirm by pressing when all settings have been made. Press
to return to the main menu.
8.3.8 Date & Time
Under this menu point you can define the system time and date.
This data is used in the event log, in text messages and on the standby
display.
Changing the date and time
5. Enter your user code. Scroll through the menu options using the
keys, or alternatively press to display the “Call Routing” menu
point.
↑↓ ENT to select
Date & Time
Confirm by pressing
. The following message is displayed: “Enter
New Date”.
6. Enter the date using the number keys (DD.MM.YY) and confirm by
pressing .
7. Enter the time using the number keys and confirm by pressing .
8. Press to return to the main menu.
9. View Log
When the time and date are entered, a wide range of important system
processes are stored in the event log (e.g. voltage errors, date changes, alarm
triggers, output activation etc). The event log can manage up to 128 entries,
which also remain when the power supply is disconnected.
9.1 Displaying the event log
5. Enter your user code. Scroll through the menu options using the
keys, or alternatively press to display the “View Log” menu point.