ABUS AZ6302 Terxon GSM dialer - Manual (Page 80)

80
Dialling attempts can only be cancelled by entering the user
code.
- Code Or Restore
Dialling attempts can only be cancelled by entering the user
code or removing the trigger signal.
- Restore Only
Dialling attempts can only be cancelled by removing the
trigger signal.
8. Press to exit the menu.
8.3.5.2 Confirmation settings
The confirmation settings are used to define whether the GSM dialer should
dial the other contact addresses after confirmation or cancel the dialling
procedure.
To confirm the call, the recipient must press the number 8 on the telephone
keypad. If the call is not confirmed, then the GSM dialer calls the next
programmed contact number.
Configuring the confirmation settings
6. Enter your user code. Scroll through the menu options using the
keys, or alternatively press to display the “Ack & Abort” menu
point.
↑↓ ENT to select
Ack & Abort
Confirm by pressing
. The following message is displayed: “Clear
By Options”.
7. Use the scroll key to display the following: “Confirmation settings”.
8. Press to select. The display shows the default setting “Anyone”.
9. Use the scroll keys and confirm one of the following options
using :
- Anyone
Further dialling procedures are cancelled when the message
is confirmed (default).
- No One