Extron Electronics TLP 1000TV User Guide - Manual (Page 25)

If required, locate the Global Configurator program on the disc or website and install that
also. By default, the Installer program creates and places the Global Configurator program
in the
C:\Program Files\Extron\GCx.x folder, where x.x represents the version of the
Global Configurator program. During installation, there is an option to place an icon on
the Windows desktop.
Both programs can be downloaded from the Extron website (
www.extron.com ). Select
the Download tab and click the Software option in the sidebar at the left. Navigate to
GUI Configurator or Global Configurator and click Download next to the program. Follow
the on-screen instructions to complete installation. A folder is created on the C:\ drive and
an icon may be placed on the desktop.
Using the TouchLink Panel Web Pages
Both the TouchLink panels have default web pages that can be used to read and change
the current settings of the panels. The web pages can be accessed as follows:
1. Open your browser and type the IP address of the TLP 1000 unit into the address field.
The browser opens the TouchLink panel Status page, which is read-only and provides
basic information about the model, date and time, and IP settings.
Figure 19. System Status Page
TLP 1000MV and TLP 1000TV • Configuration Software 19