Extron Electronics PowerCage FOX Tx_Rx DVI Plus User Guide - Manual (Page 36)

Firmware upgrade
Firmware can be upgraded for each unit via the PowerCage Configuration port using the
Extron Firmware Loader utility from the Windows-based control program.
NOTES: • Firmware can be upgraded through the PowerCage Configuration port only.
• When firmware upgrades are available, they are unique to the unit:
• A unique transmitter firmware upgrade for the Tx unit
• A unique receiver firmware upgrade for the Rx unit.
• Your PC must be connected directly to the unit for the firmware to be updated.
Downloading the firmware from the website
To obtain the latest version of firmware for your PowerCage FOX unit:
1. Visit the Extron website, www.extron.com , click the Download tab, and then click the
Firmware link on the left sidebar menu (see figure 19).
1
1
Figure 19. Location of Firmware Upgrade Files
2. On the Download Center screen (see figure 20), click the links for the appropriate
firmware file or files.
NOTE: There are different files for transmitters (Txs) and receivers (Rxs) and for VGA
and DVI units.
2
Figure 20. PowerCage FOX Firmware
PowerCage FOX DVI and PowerCage FOX VGA • Remote Control 31