Extron Electronics MS9200P - Manual (Page 76)

HD Player Chapter 12: Remote Control Protocols
76 Rev. 6.8
Playlist Commands
ClearPlaylist
This command clears all the entries from the playlist identified by .
The Player will respond with:
OK or ERROR
ListAllPlaylists
Returns a list of all the playlists stored in the server.
The player responds with a list of Playlist commands as follows:
laylist
Where identifies a playlist. The list is terminated with an empty Playlist message.
Example:
Playlist “Left Screen”
Playlist “Right Screen”
Playlist
AddPlaylist
Adds a clip identified by located in the media path identified by to the playlist identified by
.
The Player will respond with:
OK or ERROR
Example:
AddPlaylist “Left Screen” “/e/exhibits” “Main screen intro.mpg”
AddPlaylist “Left Screen” “/e/exhibits” “Main screen L.mpg”
The control system doesn’t need to terminate the playlist creation commands since the functionality is implied in
the command.
LoadPlaylist
Loads the playlist identified by onto the channels specified in . The clips specified in the
playlist must be available to all channels identified in .
The Player will respond with:
OK or ERROR