Extron Electronics MS9200P - Manual (Page 68)

HD Player Chapter 11: Remote Control Configuration
68 Rev. 6.8
The Remote Control Wizard - Serial Control Parameters (RS232) page
This page of the wizard will appear if Serial (RS232) was selected from the “Method Type” page described above.
The page is used to select the parameters for the serial port, from the following allowable settings.
Baud 1200, 2400, 4800, 9600, 19200, 57600, 115200.
Parity Odd, Even or None.
Stop bits 1 or 2 stop bits.
To modify the Serial Control Parameters:
• Click the arrow buttons adjacent to the appropriate boxes and select the necessary settings from the
options listed.
• Click the Next button to accept the settings and advance to the Choose Protocol page
Remote Control Wizard Protocol page
Use this page to select the protocol necessary for a specific Remote control Method. A detailed description of the
available protocols is provided in the “Protocol Reference” section later in this manual.