Extron Electronics MS9200P - Manual (Page 64)

HD Player Chapter: 10 Configuration Files
64 Rev. 6.8
Chapter 10: Configuration Files
To enable the HD Player to “remember” its configuration when the power is turned off and back on, configuration
files are stored on disc. These files contain information such as the Playlist, defined remote control methods and
startup options.
You may have as many different configuration files as you wish.
These configuration files have the extension. vsf and, consequently, are often referred to as .vsf (video Player file)
files.
The HD Player will automatically load the last configuration file used when the unit is switched on.
Saving the current configuration
The current configuration can be saved using the Save As command.
• Click File/Save As on the main menu.
The Save As window appears:
• Enter the name of the file you wish to create (make sure it has a .vsf extension)
• Click the Save button (The enter key performs the same action).
Note: When the HD Player starts up it will automatically load the last file saved.
Once a file has been given a name using the “Save As” command, the “Save” command can be used to speed up
the operation. Save will replace the named file without prompting for a new name.
To save a configuration file:
Click File/Save on the main menu