Extron Electronics ImageStar HD - Manual (Page 79)

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol
I460GB issue 4 Page 79
SetIpMode
Function Disables Auto Detect mode on a specified input and configures it for a predefined
source type.
Format SetIpMode=<channel>,<mode number>,<sync type>,<color space>,0,0\r
Arguments <channel> is the input channel number:
0 = Input 1 (RGB)
1 = Input 2 (RGB)
2 = Input 3 (VIDEO / S-VIDEO)
3 = Input 4 (VIDEO)
<mode number> is a number representing the required source type:
Refer to table on page 80.
<sync type> is a number representing the sync type for an RGB signal:
For inputs 1 and 2 only, using RGB sources:
0 = Separate H and V
1 = Composite Sync (on H channel)
2 = Sync on Green/Tri-Level
For input 3 only:
0 = CVBS
1 = S-Video (Y on input 3, C on input 4)
<color space> is a number representing the color space:
For inputs 1 and 2 only:
0 = YCrCb
1 = YPrPb
2 = RGB
Examples SetIpMode=1,30,0,2,0,0\r
Configures input 2 to XGA 60Hz DMT using RGB with separate H and V sync.
SetIpMode=2,8,1,0,0,0\r
Configures input 3 (and 4) to NTSC 4.43 TAPE using S-Video.