Extron Electronics ImageStar HD - Manual (Page 67)

IMAGESTAR HD USER GUIDE Section 4: Technical Data
I460GB issue 4 Page 67
Display Outputs
Function: Final scaled analog or digital output to the target display, labeled
OUTPUT 1, 2, 3 and 4. Up to four display devices are supported,
depending on output resolution
Card Weight: 0.29 kg (0.63 lb).
Connector Type: DVI-I (female).
Pin-out Details:
Digital Connections
Pin Function Pin Function Pin Function
1 TMDS 2- 9 TMDS 1- 17 TMDS 0-
2 TMDS 2+ 10 TMDS 1+ 18 TMDS 0+
3 Ground (2/4) 11 Ground (1/3) 19 Ground (0/5)
4 No connection 12 No connection 20 No connection
5 No connection 13 No connection 21 No connection
6 DDC Clock 14 +5V supply* 22 Ground (Clk)
7 DDC Data 15 Ground (for 5v) 23 TMDS Clock+
8 Analog V-Sync 16 Hot Plug Detect 24 TMDS Clock-
* 5V on pin 14 limited to 100mA by thermal fuse on each output.
Analog Connections
Pin Function
C1 Red Signal
C2 Green Signal
C3 Blue Signal
C4 Horizontal Sync
C5 Ground
Mating Connector:
DVI-D, DVI-A or DVI-I (male).
Recommended Cable: Digital: DVI Single or Dual Link Digital Video Cable;
Analog: DVI Analog Video Cable.
Max. Cable Length: Digital: 5 metres (16 feet);
Analog: 10 metres (32 feet).
IMPORTANT: Clip-on Ferrites (e.g. Würth part no. 74271132) must
be fitted to each output cable as near as possible to the output
connector.
NOTE: Analog Vertical
Sync is on pin 8.