Extron Electronics ImageStar HD - Manual (Page 45)

IMAGESTAR HD USER GUIDE Section 3: Configuration
I460GB issue 4 Page 45
To add a device manually…
Click the Network window.
Click the Network menu and choose Add.
The
ImageStar HD Node dialog box will appear:
If required, change the Local name label to something more meaningful.
NOTE: The Node name currently serves no purpose and can be ignored.
Enter a suitable Node IP address and Subnet mask for the device.
NOTE: The Gateway address currently serves no purpose and can be left as zeros.
When the details are correct, click OK.
A new device entry will appear in both the Network and ImageStar HD Devices windows.
If you need to change the device name or IP settings for this device, please refer to ‘Changing
Network Settings for a Device’ on page 46.
IMPORTANT: Remember that in order to communicate with an ImageStar HD device, it
must be on the same subnet as the control PC/laptop (see page 40).
Otherwise, you can now move on to ‘Setting-up ImageStar HD Inputs’ on page 50.