Extron Electronics ImageStar HD - Manual (Page 71)

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol
I460GB issue 4 Page 71
Command String Format
The format of each command string comprises the command name (e.g. SetAutoDet) followed by six
user-definable values or arguments:
<command name> =rg1>,<arg2>,<arg3>,<arg4>,<arg5>,<arg6>\r
Taking the example of SetAutoDet, the command string would look as follows:
SetAutoDet=0,0,0,0,0,0\r
Please note:
•
All six arguments must be present even if they are not used. Unused arguments are ignored
but we recommend that they be set to
0
• Commas must separate each argument
• The command string must terminate with \r